Previous month:
December 2020
Next month:
February 2021

Upgrading to eero 6 and HomeKit

A quick word of caution. Although I’m a fan of eero (starting before Amazon bought them), if you’re a HomeKit user, there is an obvious oversight in their software of which you should be aware.

Replacing an old eero device with a new one is easy using the eero app. But, when you delete the old device, the unit is not removed from HomeKit. And once the device is removed from your network, you can’t delete it from your home. You’ll be forever stuck with error messages about “non-responsive” devices in your Home app.

eero homekit error

eero tech support confirms that there is no way to fix this after the units are decommissioned. Clearly, their software should either do this for you automatically, or alert you before you shoot yourself in the foot. But it does neither. Fair warning.

See also: eero Beacon Deployed, and Inconsistent eero Speed Test Results Explained.



Covering a doorknob hole

When we moved into our place, the front gate had a deadlock and a locking doorknob. This combination created some usability problems:

  • the doorknob, when locked, could be easily unlocked by reaching through the fence and turning the dial on the inside knob. This made it silly to ever bother to lock it.
  • when the doorknob was unlocked, it would turn (of course) but if the deadlock were locked, the gate still couldn’t be opened. The state of the deadbolt was inscrutable.
  • there’s no indication which way the gate opens. So, even if both locks were not engaged, you had a fifty-fifty chance of the gate opening when you pushed it. If it didn’t open, you couldn’t be sure why.

I quickly noticed that most visitors struggled with these conditions. Pushing, pulling, turning, and so on, never sure if the gate was locked, or if it was some combination of the three possible impediments. (You can view a photo of the gate in this post.)

To correct some of these issues, I removed the doorknob from the gate. But this created an unsightly problem — there was a hole where the knob used to be. Additionally, because the gate is iron, I wanted to cover the hole to prevent water infiltration.

It was inexplicably hard to find, but I did eventually uncover the two solutions I needed. The first is a plate that covers the hole where the doorknob used to be, and the second is a smaller plate that covers where the latching mechanism used to protrude.


doorknob hole cover

Here’s what I purchased:

I can’t recommend the Door Hole Plate Cover that I used because the bolt that comes in the package is too large to fit through the hole in the cover. (What the hell‽) I had to enlarge the hole to make it work. But perhaps you can find another brand that’s properly designed. The Door Edge Filler (not shown in my photo above) fit perfectly, but you’ll need to supply your own screw to install it.

For more on my modifications to this gate, see: A Remote, Wireless Gate Alarm